ADC AVIDIA SWD4573I1 - Manual (Page 200)

Configuring PVCCs
174 Avidia System Configuration and Management User Manual
Parameter
<index>
The PVCC Table row index number of the primary PVCC for which you want to switch
traffic from the backup PVCC back to the primary PVCC.
Example
::pvcc=> restore 3
Changing Cell Channel Card PVCC Admin Status
1 From the ::pvcc=> prompt, type show then press to display the configured
parameters for all PVCCs.
2 Note the index number of the PVCC for which you want to change the status.
3 Type the admin command in the following format then press .
admin <index> (up|down)
Parameters
<index>
The index number of the PVCC you want to activate or deactivate.
(up|down)
Type up to activate the PVCC. Type down to deactivate the PVCC.
Example
::pvcc=> admin 2 up
ENTER
ENTER