ADC AVIDIA SWD4573I1 - Manual (Page 626)

Performing System Diagnostics
600 Avidia System Configuration and Management User Manual
2 From the NAND EEPROM/DOSFS Menu you can do the following:
• Test the read/write functionality of the NAND EEPROM by typing t then pressing
. The system runs a test and reports the results on the screen.
• View a directory of the files contained in the management card NVRAM by type d
then pressing . You may want to do this to verify that the image file was
successfully downloaded from the boot server.
• Specify a file to boot from the management card by typing l <filename> then
pressing , where <filename> is the complete filename and extension of the
file you want to load. You may want to do this to load a different image file than the
file that is set as the default boot file.
• View the content of any text file by typing r <filename> then pressing ,
where <filename> is the complete filename and extension of the file you want to
view.
• To make the amcprof.txt file on the management card read-only, type n . The
amcprof.txt file contains the management card hardware and software serial and
revision numbers.
• To view binary image file information, such as the version number, processor name
and revision number, type
v <filename> where <filename> is the complete
file name and extension of the binary file for which you want to view information.
• If the EEPROM Test (option t ) fails, which indicates that the EEPROM has been
corrupted, type u then press to reformat the EEPROM. The EEPROM is
reformatted (restored to its original factory condition).
• Type x then press to return to the DMU Test Main Menu .
Testing the TRAM CUBIT
From the DMU Test Main Menu , type 3 then press . The system tests the CUBIT,
reports the results on the screen, and displays the DMU Test Main Menu .
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER