ADC AVIDIA SWD4573I1 - Manual (Page 204)

Configuring PVCCs
178 Avidia System Configuration and Management User Manual
The following table describes the information displayed after you type a show pvc command.
Column Description
Index The PVCC table index number of the displayed
PVCC.
Admin The configured status of the PVCC, either up
(activated) or down (deactivated).
Oper The current operational status of the PVCC, either
up (PVCC is passing data) or down (PVCC is not
passing data).
Source Port The PVCC source port number. This is the
lower-numbered of the two PVCC ports. If you
assigned the higher-numbered port to the
<src
port> parameter during PVCC configuration,
the system automatically reassigns the
higher-numbered port to the
<dest port>
parameter.
VPI The source port VPI.
VCI The source port VCI.
Destination Port The PVCC destination port number. This is the
higher-numbered of the two PVCC ports. If you
assigned the lower-numbered port to the
<dest port> parameter during PVCC
configuration, the system automatically
reassigns the lower-numbered port to the
<src
port> parameter.
VPI The destination port VPI.
VCI The destination port VCI.
Source TxTraffic Index The ATM traffic profile assigned to data
transmitted from the source port. The transmit
traffic profile assigned to the PVCC source port
are adjusted to reflect the same service on the
destination port.
Source RxTraffic Index The ATM traffic profile assigned to data received
on the source port. The receive traffic profile
assigned to the PVCC source port are adjusted to
reflect the same service on the destination port.