ADC AVIDIA SWD4573I1 - Manual (Page 225)

Chapter 8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 199
Changing ATM Routing Admin Status
From the ::route=> prompt, type the admin command in the following format, then press
.
admin <index> <(active|inactive)>
Parameters
<index>
The ATM Routing Table index number of the entry you want to change.
<(active|inactive)>
Type active to activate the SPVC, or type inactive to deactivate it.
Deleting ATM Routing Table Entries
From the ::route=> prompt, type the delete command in the following format, then press
.
delete <index>
Parameter
<index>
The index number of the ATM Routing Table row you want to delete.
Example
::route=> delete 2
ENTER
ENTER