Adding idsl line profiles – ADC AVIDIA SWD4573I1 User Manual
Page 433
Chapter 20: Configuring Subscriber Services
Avidia System Configuration and Management User Manual
407
Adding IDSL Line Profiles
You add IDSL line profiles from the
IDSL Line Configuration Profile Table
window.
1
In the
Rate
box, select the desired transmission rate on the link in kbps (64, 128, or 144).
2
In the
Performance Monitor
box, select the mode (
Path
or
Segmented
).
The mode determines how IDSL current performance data (see
“Managing IDSL Diagnostics” on
) are collected.
•
In
Path
mode, statistics are reported for each segment of the connection path (loop)
cumulatively. In the customer direction, node 0 (Avidia system) reports statistics for
the first segment, node 1 reports statistics for the first and second segments, etc. In the
network direction, node 0 (Avidia system) reports statistics for all the segments, node
1 reports statistics for all but the first segment, etc.
•
In
Segmented
mode, statistics are reported for each segment of the connection path
(loop). In both the customer and network directions, node 0 (Avidia system) reports
statistics for the first segment, node 1 reports statistics for the second segment, etc.
3
In the
SES Threshold
box, type the severely errored second threshold in seconds.
The SES Threshold is the number of block errors required for defining a severely errored
second. The range is 1 to 15, with 3 as the default. A block error is generated any time there
is a CRC violation detected on an IDSL superframe.
4
Click
Add
to add the IDSL line profile.