EOTech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUMINATOR AIMING LIGHT - Manual (Page 22)

1-10
1.9 FEATURES AND CONTROLS (Continued)
Table 1-3. List of Features and Controls (Continued).
Key
Control/
Indicator
Function
8 Visible Aim Laser Used to provide a precision aim point or to
mark targets at close range during the day
or night, without the need of night vision
devices. It may also be used for boresight-
ing the ATPIAL during daylight hours.
9 Battery Cap /
Compartment
Provides secure housing for the 3V lithium
battery that powers the ATPIAL.
10 FIRE Button Primarily used to activate the laser(s) that
corresponds with the position of the Mode
Selector.
11 Aim Laser
Adjusters
Used to bring the Visible and IR Aim
Lasers into azimuth and elevation
alignment with the barrel of the weapon.
12 Rail Grabber
Bracket
Secures the ATPIAL to a weapon equipped
with a MIL-STD-1913 rail.
13 Safety Screw
Storage Location
Allows for secure storage of the safety
screw after it has been removed from the
lockout position.
14 Remote Jack /
Jack Plug
Provides an interface for the Remote Cable
Switch. When installed, the jack plug
protects the remote jack from debris and
moisture.
15 LED Status
Indicator
Indicates when the ATPIAL is emitting
laser energy, when the battery power is
low, and displays the pulse rate during
programming of the IR Illuminator.