EOTech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUMINATOR AIMING LIGHT - Manual (Page 54)

3-4
3.2 INSPECTION / CLEANING (Continued)
Laser Ports
Inspect the laser ports for dirt, dust, and grime. Remove any
large particles or loose dirt using air or a soft cloth. Fine
cleaning should be performed using lens tissue and lens
cleaning solution. Clean water, isopropyl alcohol, or general
purpose window cleaner may be used to remove stubborn
stains. Avoid using excessive force as this may scratch the
lenses.
Remote Jack
Inspect the remote jack for corrosion, dirt, and damage.
Gently remove any large particles of foreign matter and
clean the contacts using a cotton swab dipped in isopropyl
alcohol.
3.3 CORRECTIVE MAINTENANCE
The ATPIAL has no internal parts or assemblies replaceable
by the operator or organizational level personnel. See
section 3.4 for guidance regarding maintenance and/or
repair actions beyond those described in this manual.