JELD-WEN JII023 Vinyl Projecting Windows with Integral Nailing Fin User Manual
Page 7
INSTALLATION INSTRUCTIONS
for Vinyl Projecting Windows with Integral Nailing Fin (JII023)
7
APPLY THE SELF-ADHESIVE FLASHING
Note!
Keep the edge of the self-adhesive flashing as close to the
window frame as possible.
3. Apply the side
pieces starting
2" above the
header.
4. Center and
apply the
header piece
above the
header.
5. Press the
flashing down
with a J-roller.
6. Do not
allow gaps
or bubbles
beneath
self-adhesive
flashing
(remove and
replace if
necessary).
PREPARE FLASHING
1. Cut three pieces of self-adhesive flashing as follows:
• One header piece 12" longer than the header
• Two side pieces 7" longer than each side
SPRAY ADHESIVE/PRIMER
Note!
Protect window from overspray.
2. Apply spray
adhesive/
primer as
instructed to
nailing fin,
sheathing and
building wrap
at the sides and
head as shown.
FLASH GARDEN WINDOW
10
Sp
ra
y
Ad
he
siv
e
6"
2"
2"
6"
2"