JELD-WEN JII023 Vinyl Projecting Windows with Integral Nailing Fin User Manual

Page 8

Advertising
background image

INSTALLATION INSTRUCTIONS

for Vinyl Projecting Windows with Integral Nailing Fin (JII023)

8

AFTER INSTALLATION

1. Adjust window

for best
operation.

2. Install exterior

wall surface
within
seven days
of window
installation.

3. Maintain

gap of 3/8"
between
window frame
and final
exterior wall
surface (siding,
stucco, etc.).

4. Ensure weep

holes/channels are clear of debris for proper water drainage; do not
seal weep holes/channels if present.

5. Protect recently installed units from damage from plaster, paint, etc.

by covering the unit with plastic.

Garden windows
are rated for a
weight handling
load of 8 lbs.
per square foot.
Although it is
not required,
the installer may
provide extra
support to the
garden window
with “L” brackets.
Build seat board
bracing under the
mull joints of the
unit. To reduce
heat loss, the
bottom of the
window may be
insulated. Check local building code requirements.

COMPLETE INSTALLATION

1. Release the building wrap from above the header (previously taped

up) and overlap the header flashing. Seal the ends with self-adhesive
flashing or building wrap tape.

2. Seal the top corners of the window with a 1/4" bead of sealant. Tool

into a fillet shape.

3. Create a continuous air seal around the entire interior perimeter of

the window with a bead of sealant where the window contacts the
structure.

COMPLETE GARDEN WINDOW INSTALLATION

11

Seal corners

Gap

Please visit www.jeld-wen.com for warranty and care and

maintenance information.

Thank you for choosing

©2014 JELD-WEN, inc.; This publication and its contents are owned by JELD-WEN, inc. and are protected under the U.S. Copyright Act and other intellectual property laws. All trademarks, service marks,
logos and the like (whether registered or unregistered) are owned or controlled by JELD-WEN, inc. or others. Unauthorized use or duplication of JELD-WEN intellectual property is prohibited.

JELD-WEN reserves the right to change product specifications without notice. Please check our website, jeld-wen.com, for current information.

(05/14)

Advertising