AMX DTMF+ Interface AXB-DTMF+ - Manual (Page 17)

Programming
13 AXB-DTMF+ DTMF+ Interface
Timing System Send_Commands (Cont.)
Command Description
ORIONMAX-XXX Outgoing ring on time maximum.
• Time increment = 100 ms
• Default at reset = 22
Example:
SEND_COMMAND DTMF, 'ORIONMAX-30'
Sets the outgoing ring on time maximum to 3.0 seconds (30,000 ms) (see
NOTE for Send_Command 'OBUOFFMAX-XXX').
ORIONMIN-XXX Outgoing ring on time minimum.
• Time increment = 100ms
• Default at reset = 8
Example:
SEND_COMMAND DTMF, 'ORIONMIN-25'
Sets the outgoing ring on time minimum to 2.5 seconds (2,500 ms) (see NOTE
for Send_Command 'OBUOFFMAX-XXX').
PAUSE-XXX Set pause time for the comma (,) symbol in the Dial Send_Command (refer to
'DIAL-X-XXX-XXXX ').
• Time increment = 100 ms
• Default at reset = 20
Example:
SEND_COMMAND DTMF, 'PAUSE-25'
Sets pause time to 2.5 seconds (2500 ms).
ROHOFFMAX-XXX
ROHOFFMIN-XXX
Receiver off-hook off time minimum or maximum.
• MAX and MIN time increment = 10 ms
• MAX default at reset = 140
• MIN default at reset = 1
Example:
SEND_COMMAND DTMF, 'ROHOFFMAX-65'
Sets the receiver off-hook off time minimum to .065 second (65 ms)
SEND_COMMAND DTMF, 'ROHOFFMIN-110'
Sets the receiver off-hook on time minimum to .11 second (110 ms)
ROHONMAX-XXX
ROHONMIN-XXX
Receiver off-hook off time minimum or maximum.
• Time increment = 1 ms (firmware version 2.11 and lower)
10 ms (firmware version 2.12 and higher)
• MAX default at reset = 140 (firmware version 2.11 and lower)
10 (firmware version 2.12 and higher)
• MIN default at reset = 1 (firmware version 2.11 and lower)
10 (firmware version 2.12 and higher)
Example:
SEND_COMMAND DTMF, 'ROHONMAX-65'
Sets the receiver off-hook off time minimum to .065 second (65 ms)
SEND_COMMAND DTMF, 'ROHONMIN-110'
Sets the receiver off-hook on time minimum to .11 second (110 ms)