Sper Scientific 840052 Data Acquisition Software - Manual (Page 17)

15
o o Temperature value ( C or F ) is shown in the left block.
Relative Humidity ( % ) is shown in the right block.
While meter is changing the unit, the software displayed unit will be
changed as well. Recommend to reset the Display Control at the
same time, or you will see a minor chart change on the screen.
(See Diagram S)
HYGRO-THERMOMETER
Diagram S
FORMAT:
Baud Rate :1,200 bit /sec.
Data Bits : 7
Stop Bit : 1
TXXX.XC(F):HXX.X%