Sper Scientific 840052 Data Acquisition Software - Manual (Page 23)

Total 5 parameters could be displayed on the monitor:
Air temp., IR temp., RH, WET and DP.
The meter unit can be easily changed at your disposal, if the meter
o o unit sets in C , the data logging value is shown with C. Once you
o o change the meter unit to F, the screen unit will be changed to F
simultaneouly.
IR PSYCHROMETER
Recommend to reset the Display Control at the same time, or you
will see a minor chart change on the screen. (See Diagram Y )
FORMAT:
Baud Rate :9,600 bit /sec.
Data Bits : 8
Stop Bit : 1
TXXX.XC(F):TXX.XC(F):HXX.X%:wXXX.XC(F):dXXX.XC(F)
If the RH is in the right block, the left block will be others.
Diagram Y
21