Sper Scientific 840052 Data Acquisition Software - Manual (Page 21)

There are 5 parameters could be selected on the screen:
2 DO values ( related and absolute), Temperature, Pressure and
Salinity.
The meter unit can be easily changed at your disposal, if the meter
o o unit sets in C , the data logging is shown with C. Once you
o o change the meter unit to F, the screen unit will be changed to F
simultaneouly.
DISSOLVED OXYGEN
Recommend to reset the Display Control at the same time, or you
will see a minor chart change on the screen. (See Diagram W )
FORMAT:
Baud Rate :9,600 bit /sec.
Data Bits : 8
Stop Bit : 1
CXX.XXmg/l(ppm):CXX.XX%:TXXX.XC(F):PXXXXmmHg
(or XXX.XkPA):SXX.Xppt
If select DO (%) in left block, the right block will be DO (mg/L) or
others.
Diagram W
19