Sper Scientific 840099 Datalogging Manometer - Manual (Page 10)

10
5. By default, the first reading will be stored in memory
location 01: using the date & time as the filename. The
pressure reading is displayed next to the P: (for exam-
ple: 0.025 psi).
6. If desired, press F3 (EDIT) to edit the filename. Then,
use the Keypad to edit the filename. Cycle through the
characters by depressing the key until the desired char-
acter is highlighted. Once the filename has been de-
fined, press F4 (ENTER).
7. To take another reading, press the  button to advance
to the next memory location and continue with the next
reading.
8. Press F1 (EXIT) to return to the Welcome menu.
MEASUREMENT PROCEDURES