Sper Scientific 840099 Datalogging Manometer - Manual (Page 17)

17
SOFTWARE CONFIGURATION
Use the included USB 2.0-P cable and software to down-
load saved data to a PC for further analysis, or to upload
pre-edited filenames to save set-up time.
 PC requirements: Win98 or above.
Main Menu Options
(see Figure 1)
 File
 Mode
 Port
 Command
 About
Main Menu Options
Mode Menu Option
1. There are two (2) data modes: Memory and Logger.
2. Select the data mode from Mode on the main menu or
the drop-down menu.
(see Figure 2)
3. In Logger mode, select “GoTo” to choose the logged da-
ta range you wish to display.
Figure 1.