Sper Scientific 840099 Datalogging Manometer - Manual (Page 11)

11
Clear All Memory Records
1. Press F2 (MEM) to enter Multiple Measurement mode.
2. Press F4 (NEXT) then press F2 (CLR) for two (2) se-
conds. After two (2) seconds the “Clear All?” message
is displayed. Press F2 (YES) again to clear all 99
memory locations or F3 (NO) to cancel the clear func-
tion.
3. Press F1 (EXIT) to return to the Welcome menu.
MEASUREMENT PROCEDURES
Clear Single Memory Record
1. Press F2 (MEM) to enter Multiple Measurement mode.
2. Use the ▲ or  buttons to move to the desired memory
location.
3. Press F4 (NEXT) then press F2 (CLR). Once F2 is
pressed the “Clear ?” message is displayed. Press F2
(YES) again to clear the highlighted memory location or
F3
(NO) to cancel the clear function.
4. Press F1 (EXIT) to return to the Welcome menu.