Flaming River Thunderbird Rack & Pinion Cradle Kits 1955-57 - Manual (Page 10)

Thunderbird Rack & Pinion System
Page 9 of 13
Flaming River Ind. 800-648-8022
Modified on 02/06/08
JJ/RD/BC
Aftermarket Wheel Installation
1) Install horn contact kit into canceling cam tube and turn to lock.
2) Align steering wheel adapter so that the canceling cam hole is at approx the 11 O’clock position
and that one of the steering wheel mounting holes is at the 12 O’clock position.
3) To install the wheel adapter run the horn contact wire through the hole for the canceling cam and
place the adapter on to the splined column shaft.
4) Tighten the adapter-retaining nut until the adapter is approximately 1/16” away from the column
shroud.