Flaming River Thunderbird Rack & Pinion Cradle Kits 1955-57 - Manual (Page 13)

Thunderbird Rack & Pinion System
Page 12 of 13
Flaming River Ind. 800-648-8022
Modified on 02/06/08
RD/BC
Power Steering Pump Installation
A) On the driver’s side exhaust manifold remove the front mounting bolt. Using the bolt that was
removed install bracket #1 and snug bolt.
B) Remove bolt from timing chain cover and then install bracket #3 and snug bolt.
C) Mount pump onto aluminum bracket #2 and mount assembly to the brackets #1 & #3 using the
bolts that are provided.
D) Mount bracket #4 to the top water pump bolt.
E) Install turn buckle assembly from bracket #4 to power steering pump.
F) Tighten all mounting bolts.
JJ/
Connect to Manifold on Drivers
side