Installing the new water heater (cont’d), Installation checklist – State PR6 75 XRVIT User Manual

Page 24

Advertising
background image

Installation Checklist

BEFORE OPERATING THE HEATER:
1. Check the gas line for leaks.

a. Use a soapy water solution. DO NOT test for gas

leaks using a match or open flame.

b. Brush the soapy water solution on all gas pipes,

joints and fittings.

c. Check for bubbling soap. This means you have a

leak. Turn “OFF” gas and make the necessary

repairs.

d. Recheck for leaks.

e. Rinse off soapy solution and wipe dry.

2. Is the new temperature-pressure relief valve properly

installed and piped to an adequate drain? See

“Temperature-Pressure Relief Valve” section.

3. Are the cold and hot water lines connected to the water

heater correctly? See “Water Piping” instructions in the

“Installing the New Water Heater” section.

Installing the New Water Heater (cont’d)

VENT PIPE TO

OUTDOORS

PIPE CAP

HOT

COLD

DRIP LEG

(Sediment trap)

GAS SUPPLY

SHUTOFF VALVE

TEMPERATURE-PRESSURE

RELIEF VALVE

TEE

SHUTOFF

VALVE

DISCHARGE PIPE

(Do not cap or plug)

MODEL RATING PLATE

4. Is the water heater completely filled with water? See

“Filling the Water Heater” instructions in the “Installing

the New Water Heater” section.

5. Will a water leak damage anything? See the “Locating

the New Water Heater” section.

6. Is there proper clearance between the water heater and

anything that might catch fire? See the “Locating the

New Water Heater” section.

7. Do you have adequate ventilation so that the water

heater will operate properly? See “Combustion Air and

Ventilation” in the “Locating the New Water Heater”

section.

8. Is the vent piping properly secured? See “Venting”

instructions in the “Installing the New Water Heater”

section.

9. Is there proper clearance between the vent pipe and

anything that might catch fire? See “Venting” instruc-

tions in the “Installing the New Water Heater” section.

10. Is the vent pipe properly sloped and does the vent ter-

minate outdoors? See “Venting” instructions in the

“Installing the New Water Heater” section.

11. Do you need to call your gas company to check the

gas pipe and its hookup?

HOT

COLD

24

AUTOMATIC STORAGE WATER HEATER

ELECTRICAL RATING: VOLTS 115/HZ60/AMPS 2

SUITABLE FOR WATER (POTABLE)
HEATING AND SPACE HEATING

Advertising
This manual is related to the following products: