Posey Bed 8070 - Manual (Page 26)

26 Posey Bed 8070

Purpose
Procedure
To safely get a new or existing patient into the Posey Bed.
DO NOt use a patient lift unless previously tested. This will ensure there is enough clearance
under the canopy frame to transfer the patient safely without damaging the canopy.
During patient care and transfers, lock all four ( 4) casters or lower the bed to the lowest point to
engage the transfer brakes.
NOte: Additional persons may be needed for a safe transfer.
transfer Patient into the Bed
1. Prepare bed for patient.
NOte: Raise bed for easy access.
2. Transfer the patient to the bed.
3. Complete the patient’s care plan as
needed.
4. Close access panels.
5. Complete “Quick-Check 10” (see page 29).
a. Make sure area around the bed is clear of any
tripping hazards.
b. Ensure the four ( 4) caster brakes are locked.
c. Put mattress in the flat position.
d. Ensure perimeter guards are down.
e. Unclip the Quick-Release Buckle.
f. Unzip ‘U’ side panel and secure to the top of
the canopy with hook and loop tabs.
a. Speak gently and assure them the bed is for
their comfort and security.
b. Move them to a safe area on the mattress.
a. Attach any IV lines, drainage tubes,
monitoring lines as required.
b. Talk to patient to make sure they feel
comfortable and secure at all times.
a. Zip panels completely. Check that zipper is
closed securely along the entire length of the
zipper.
b. Close the Quick-Release Buckle and tug at
the clip to make sure it is engaged.
steP DO this