Posey Bed 8070 - Manual (Page 28)

28 Posey Bed 8070

Purpose
Procedure
To safely assist a patient to exit the Posey Bed for toileting or other reasons.
DO NOt use a patient lift unless previously tested. This will ensure there is enough clearance
under the canopy frame to transfer the patient safely without damaging the canopy.
During patient care and transfers, lock all four ( 4) casters.
NOte: Additional persons may be needed for a safe transfer.
transfer Patient Out of the Bed
1. Access the patient.
NOte: Bed should be in the lowest
position.
2. Assist patient to an upright position.
NOte: Be aware that a reclined
patient may have equilibrium
problems when arising – support as
needed.
3. Help patient out of the bed. Continue to talk gently to the patient to
reassure them.
a. Speak gently to ensure they are comfortable
and secure.
b. Check that they are a safe distance from the
panel.
c. Make sure area around the bed is clear of any
tripping hazards.
d. Position bed to the lowest position.
e. Put mattress in the flat position.
f. Ensure perimeter guard is down.
g. Unclip the Quick-Release Buckle.
h. Unzip ‘U’ side panel and secure to the top of
the canopy with hook and loop tabs.
i. Detach tubes as needed.
a. Help patient slide both legs to the side of
the bed.
b. Modify as needed depending on patient’s
needs.
c. Consider gait belts / transfer belts to assist
with patient transfer.
steP DO this