Vaisala HMP46 - Manual (Page 28)

HMI41 AND PROBES
Operating Manual
M210316EN-A
24
estimate the time of the measurement stored during automatic data collecting
provided that the starting time and the measurement interval are known.
Numbers on the right on the second line indicate the temperature reading
measured simultaneously with the reading on the first line; if you wish to see
the decimals, press ENTER. The reading appears on the display with one
decimal:
RH
T °C
%
In a couple of seconds the indicator returns to the previous display.
Press MODE to change the quantity on the first line:
T
Td °C
°C
If you press ENTER (with any quantity on the first line), an arrow appears on
the higher right hand corner of the display:
RH
T °C
%
Press HOLD while the arrow is displayed to scroll the measurement results
(note that the sequence number changes):
RH
T °C
%
HOLD :
RH
T °C
%
etc.
If the button HOLD is pressed continuously, numbers change in a faster rate.