Vaisala HMP46 - Manual (Page 68)

HMI41 AND PROBES
Operating Manual
M210316EN-A
64
NOTE
The HMI41 setup contains further settings (start, baud,
seri and calib) that appear after probe type setting when
pressing ENTER. Start setting is changed only when
using the HMP44/L probes (
START 5, see the HM44
Operating Manual). For calib, see the operating manual.
Other settings are meant for the HMI41 used as a field
calibrator for Vaisala humidity transmitters. Do not
change them. Press ON/OFF after probe type setting.