Vaisala HMP46 - Manual (Page 33)

HMI41 AND PROBES
M210316EN-A Operating Manual
29
Figure 7.1.2 Selecting the parameters in Windows 95 and NT
7.2 Transferring the data
When you have given the communication parameters, you can start
transferring the data from the HMI41. Note that communication parameters
can be stored in the computer for future use.
To start transferring the data, make sure that the HMI41 is connected to a
serial port of your computer and that the terminal session is open. Turn the
HMI41 on with the ON/OFF button. A text similar to the following should
now appear on your computer display:
HMI41 / 2.01
>