Vaisala HMP110 - Manual (Page 39)

Chapter 4 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 37
View Calibration Information
Use the CDATE command to view the calibration date, CTEXT to view
the calibration info text, and ADJD command to view the adjustment
date. Date format for CDATE and ADJD is YYYYMMDD.
CDATE<cr>
CTEXT<cr>
ADJD<cr>
Examples:
cdate
Cal. date : 20120907
ctext
Cal. info : VAISALA/HEL
adjd
Adj.date : 0
View Order Code
Use the CODE command to view the order code that has been stored in
the probe. This command is useful if you need to order a new probe with
the same options.
CODE<cr>
Example:
code
Order code : A12A0A2B0
View Serial Number
Use the SNUM command to view the serial number of the probe.
SNUM<cr>
Example:
snum
Serial number : H3640004