Vaisala PTU200MIK1 - Manual (Page 13)

C HAPTER 4_________________________________________________PTU200TRIPOD INSTALLATION
V AISALA _________________________________________________________________________ 11
CHAPTER 4
PTU200TRIPOD INSTALLATION
Place the pole onto the tripod
stand and fasten it with the
attachment screw. The handle of
the screw is under the center of
the stand.
The legs of the stand are
adjustable. To release the leg, lift
the grip upwards. Adjust the leg
to desired length and lock it by
pressing the grip downwards.
Use the clamps without the fitting
rings to attach the PTU200MIK to the
pole.
Certain meteorological standards
define the altitude for the pressure
measurement. As the transmitter is
installed into the protective box, the
distance of the pressure transducer
from the bottom of the transmitter box
is 192 ±5 mm.
Open
Locked