Vaisala PTU200MIK1 - Manual (Page 7)

C HAPTER 3___________________________________________________ PTU200MIK1 INSTALLATION
V AISALA __________________________________________________________________________ 5
Installation when static pressure head is on the
right side
2.Fasten the installation plate
onto the support arm.
3.Mount the radiation shield
the holes of the installation
plate. Fasten it to the plate
with the slot headed screws
(M5x16 DIN84,provided)
1.Mount the support
arm on the upper
clamp. Use the plate,
two hex bolts and
washers for the
attachement as shown
in figure.
4. Insert the boom adapter
into on support arm. Fasten it
with two screws.
Installation plate
Radiation shield
5. Attach the support arms
and fasten with two screws.
Boom
adapter