Red Lion PAXDP - Manual (Page 7)

7
4.1 POWER WIRING
1 2
AC AC
AC Power
Terminal 1: VAC
Terminal 2: VAC
1 2
DC+ DC-
+ -
DC Power
Terminal 1: +VDC
Terminal 2: -VDC
4.2 INPUT SIGNAL WIRING
Current Signal
(self powered)
Terminal 4: -ADC
Terminal 5: +ADC
Voltage Signal
(self powered)
Terminal 4: -VDC
Terminal 5: +VDC
Current Signal (2 wire
requiring excitation)
Terminal 3: +ADC
Terminal 5: -ADC
3 4 5
- +
10 VDC MAX.
COMM. +18 V EXC
.
INPUT
A
UNREG.
INPUT A SIGNAL WIRING
Voltage/Current Signal (3 wire requiring excitation)
Terminal 3: +Volt supply
Terminal 4: -ADC (common)
Terminal 5: +ADC (signal)
4 5
COMM. INPUT
A
+ -
LOAD
3 4 5
COMM
.
+18 V EXC. INPUT
A
3 WIRE TRANSMITTER
I/V COMM. +Vs
UNREG
.
3 4 5
+18 V EXC
.
INPUT
A
COMM.
2 WIRE
TRANSMITTER + -
UNREG.
Before connecting signal wires, the Input Range Jumper must be verified for proper position.
CAUTION: Sensor Input B common is NOT isolated from user input common. In order to preserve the safety of the meter application, the sensor input
common must be suitably isolated from hazardous live earth referenced voltages; or input common must be at protective earth ground potential. If not,
hazardous live voltage may be present at the User Inputs and User Input Common terminals. Appropriate considerations must then be given to the
potential of the user input common with respect to earth common; and the common of the isolated plug-in cards with respect to input common.
Current Signal
(self powered)
Terminal 7: -ADC
Terminal 8: +ADC
Voltage Signal
(self powered)
Terminal 7: -VDC
Terminal 8: +VDC
Current Signal (2 wire
requiring excitation)
Terminal 6: +ADC
Terminal 8: -ADC
6 7 8
- +
10 VDC MAX.
COMM. +18 V EXC
.
INPUT
B
UNREG.
INPUT B SIGNAL WIRING
Voltage/Current Signal (3 wire requiring excitation)
Terminal 6: +Volt supply
Terminal 7: -ADC (common)
Terminal 8: +ADC (signal)
7 8
COMM. INPUT
B
+ -
LOAD
6 7 8
COMM. +18 V EXC. INPUT
B
3 WIRE TRANSMITTER
I/V COMM. +Vs
UNREG.
6 7 8
+18 V EXC
.
INPUT
B
COMM.
2 WIRE
TRANSMITTER + -
UNREG.