Red Lion C48T - Manual (Page 23)

Timer Reset at Power-up
This parameter determines whether or not the timer is
reset when power is applied to the unit.
Access Preset Values
This parameter configures the type of access given to
each Preset Value when in normal operating mode and at
Program Disable Level 1. The accessibility of each Preset
can be individually configured. For more information on
Program Disable, see Front Panel Accessible Functions
With Program Disable, page 11.
Programming Keys:
C
- Selects Preset Value being configured as indicated by
the number on the left side of the bottom display line.
B
- Changes mode selection for selected Preset.
-17-
Preset 1 Value
The Preset 1 value is used to control the activation of
Output 1.
Preset 2 Value (Dual Preset Model only)
The Preset 2 value is used to control the activation of
Output 2.
Preset 1 Track Preset 2 (Dual Preset Model
only )
This parameter configures whether or not the Preset 1
value tracks or follows the Preset 2 value.
Ac PrS
PRS -y
rSt.P.uP
no
Ac PrS
PRS -y-y
PrESEt
PRS
2
2.0
PltrAc
PRS
2
no
PrESEt
PRS
1
1.0
MODE DESCRIPTION
-L Locked; Preset is not viewable at main display or
in Protected Value Menu. The Preset can only be
viewed or changed in the Programming Menu.
-y
-n
-P Protected Value; Preset value is viewable and
changeable in Protected Value Menu only. It is not
viewable at Main Display.
Single Preset
Model
Dual Preset
Model
Dual Preset
Model
Dual Preset
Model
MODE DESCRIPTION
no Preset 1 does not track Preset 2
YEs Preset 1 tracks Preset 2 value. When Preset 2
value is changed, the Preset 1 value will change
to maintain the same offset. Changing Preset 1
will modify the offset.
-OR-
Yes; Preset value is viewable and changeable at
main display when at 1st level program disable.
Value is not shown in Protected Value Menu.
No; Preset value is viewable only and not
changeable from main display when Programming
is Disabled. Value is viewable and changeable in
Protected Value Menu.
Timer is reset at power-up. YEs
no
DESCRIPTION MODE
Timer is not reset at power-up. The timer value
saved at the previous power-down is restored to
the display.
C48t-im.QXD 3/5/04 3:29 PM Page 17