AT&T E5827 - Manual (Page 11)

8
Getting started
Wall mounting
The telephone base can be installed on any standard wall-phone outlet as
shown below. Choose a location away from electronic equipment such as per-
sonal computers, computer routers, television sets or microwave ovens. Avoid
excessive heat, cold, dust or moisture.
. Connect the telephone line cord and
power adapter to the jacks on the bot-
tom of the telephone base.
5. Remove handset telephone base tab, rotate
and replace to hold corded handset secure-
ly in place when telephone base is mount-
ed on the wall.
2. Grasp and squeeze to open hinged wall
mount, then rotate wall mount and lock
in place.
4. Press the pegs firmly and slide them
down so the telephone base is held
securely on outlet mounting pegs.
3. Plug the power adapter into an elec-
trical outlet not controlled by a wall
switch. Plug the telephone line cord
into a telephone wall jack.