AT&T E5827 - Manual (Page 26)

23
Directories
Speed dialing (cordless handset only)
On the handset, numbers called most frequently
can be stored so that they can be dialed with only
two button presses.
You can enter nine speed dial numbers up to 24
digits. Each entry is associated with a dial pad
numeral key.
The nine speed dial numbers on the cordless hand-
set will be automatically added to the handset
directory. You can easily dial these telephone num-
bers by pressing and holding a dial pad key and
then pressing
PHONE/
FLASH.
You can also make existing directory entries to
speed dial entries.
To create a speed dial entry
• Press
MENU/
CHAN
to begin programming.
• Press CID/-VOLUME or DIR /VOLUME+ until
the screen displays SPEED DIAL .
• Press SELECT.
• Press a number key on the dial pad to choose a
memory location (-9).
• Enter a name (up to 5 characters), then press
SELECT (see page 25 for instructions on name
entry).
• Enter a telephone number (up to 24 digits), then
press SELECT.
• Choose distinctive ringing (yes or no) by pressing
CID/-VOLUME or DIR /VOLUME+ (see page
26 for information about distinctive ring).
• Press MENU/
CHAN
or SELECT to store the num-
ber. You will hear a confirmation tone.
NOTE: The speed dial fea-
ture occupies up to nine of the
thirty memory locations in the
directory. For example, if there
are only five speed dial entries,
then up to 25 entries can be
stored in the directory. If there
are already 30 entries in the
directory, no new directory and
speed dial entries can be stored
in memory until some of the
existing ones are deleted.
1. MENU/
CHAN
2.
DIR
3.
SELECT
(pages 24-25).
4.
NOTE: You can convert any
directory entry into speed dial
entry (page 28).
DIRECTORY
SPEED DIAL
ENTER 1-9
ENTER NAME