AT&T E5827 - Manual (Page 44)

4
Answering system operation
Message playback
Press PLAY/
STOP
to hear messages. The system
announces the number of messages, then begins
playback.
If you have new messages waiting, you will hear
only the new messages (oldest first). If there are no
new messages, the system will playback all mes-
sages (oldest first).
Announcements
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day
and time it was received.
• After the last message, you will hear “End of
messages.” If the system has less than five
minutes of recording time left, you will hear
time remaining.
Options during playback
• Press
VOLUME button to adjust speaker volume.
• Press SKIP to skip to next message.
• Press REPEAT to repeat message currently
playing. Press twice to hear previous message.
• Press DELETE to delete message being played
back.
• Press
PLAY
/STOP to stop playback.
To delete all messages
To delete all messages, press and hold
DELETE
while the telephone is idle (not during a call, or
during message playback).
1.
“You have [xx] new
messages and [xx]
old messages”
Number of messages (or dur-
ing playback, message num-
ber currently playing).
Message playback begins.
See options at right.
2.
Message playback ends.
NOTE: If F is flashing in
the message window, memory
is full. You will have to delete
some messages before new
ones can be received.
NOTE: New (unheard) messages cannot be deleted.
Press PLAY/STOP to
begin or end message
playback.
PLAY/STOP
PLAY/STOP
16