High Country Tek HFS-J-Bus - Manual (Page 27)

Electronic Controller Solutions for the Global Fluid Power Industry
Hydraulic Fan System Controller with SAE J1939 Interface
HFS-J User Guide
Part No:- 021-00158 Rev C HFS-J Hydraulic Fan System Controller User Guide Page | 27
Miscellaneous Information:
Selection Tab -> Misc
Software Controls:
Quit
Use the standard Windows® ‘X’ in the top right corner to Exit / leave / quit the program.
NOTE:
Always use this method of terminating the HFS-J PC program. This method cleanly exits the program.
This page allows the user to view
information concerning the controller
serial number, GUI Part number, BIOS
and Graphical user Interface ( GUI )
software versions as well as the ‘Born
Date’ which is taken from the local PC
used to activate the module.
This information should always be
available when requesting support so
that HCT personel know what level of
controller you are working with.
The user can also view the controller
operation via the graph window as well
as note any change on state or error
that is presented by observing the
‘Status’ window text if the scroll option
is turned ON.
While in this tab, the user can switch to any other tab by selecting it from the top of the page.