High Country Tek HFS-J-Bus - Manual (Page 8)

Electronic Controller Solutions for the Global Fluid Power Industry
Hydraulic Fan System Controller with SAE J1939 Interface
HFS-J User Guide
Part No:- 021-00158 Rev C HFS-J Hydraulic Fan System Controller User Guide Page | 8
Module Familiarity:
RS232 Communication
and programming 4 way
plug
Flame retardent epoxy
resin material for complete
IP68 ( NEMA 6P ) rating
3 x # 8 ( 5mm )
mounting holes
Industry standard 12 way
sealed Deutsch main I/O
connector
Heavy duty
cables used for
programming
harness
Controller ‘STATUS’ led –
Bi-color, indicates what
the module is doing at any
given time.
Bi-color, Controller Fault
‘Blink’ code and Fan reverse
cycle indicator LED
Full CE to latest test
standards,
J1455 ( load Dump )
and
J1939 compliance
NOTE:
This module has local diagnostic capabilities by way of the two Bi-Color ( Red / Green ) LED’s mounted
on the front of the unit. These LED’s are used to show the user a variety of ‘Blink’ codes that equate to
the precise issue or error being seen by the controller, so locating and fixing an issue will be quick and
effective. This feature is especially useful in the field where test equipment may not be available.