Agency listings and approvals, Product line information, Beammmk – Notifier FSB-200(A)/-200S(A) User Manual
Page 4
Page 4 of 4 — DN-6985:C • 11/16/09
Acclimate® Plus™ is a trademark of Honeywell International Inc.
©2009 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
www.notifier.com
Made in the U.S. A.
AGENCY LISTINGS AND APPROVALS
These listings and approvals apply to the devices specified in
this document. In some cases, certain modules or applications
may not be listed by certain approval agencies, or listing may
be in process. Consult factory for latest listing status.
•
UL Listed: S2522 (FSB-200, FSB-200S)
•
ULC Listed: S2522 (FSB-200A, FSB-200SA)
•
CSFM: 7260-0028:228
•
MEA: 95-04-E
•
Maryland State Fire Marshal: Permit # 2167
• FM Approved
PRODUCT LINE INFORMATION
FSB-200: Intelligent beam smoke detector
FSB-200A: Same as FSB-200 with ULC Listing.
FSB-200S: Intelligent beam smoke detector with integral sen-
sitivity test.
FSB-200SA: Same as FSB-200S with ULC Listing.
BEAMLRK: Long range accessory kit (required for applica-
tions in excess of 230 ft/70 m).
BEAMMMK: Multi-mount kit (provides ceiling or wall mount
capability with increased angular adjustment).
BEAMSMK: Surface-mount kit.
RTS151: Remote test station.
RTS151A: Same RTS151 with ULC listing.
RTS151KEY: Remote test station with key lock.
RTS151KEYA: Same as the RTS151KEY with ULC listing.
BEAMHK: Heating kit for use with the transmitter/receiver unit
of FSB-200S. For prevention of condensation.
BEAMHKR: Heating kit for use with the reflector on
FSB-200S. For prevention of condensation
6500-MMK: Heavy-duty multi-mount kit for installations prone
to vibration or where there is difficulty mounting the set angle.
When installed with the transmitter/receiver unit, the 6500-
SMK must be used as well.
6500-SMK: Surface-mount kit (required when using 6500-
MMK to mount transmitter/receiver).
BEAMMMK
(ceiling or wall mount kit sold sepa-
rately)
RTS151
RTS151KEY
BEAMHK
6975
beam
mk.
jpg
rt
s151
.wmf
rts
151k
ey
.wm
f
6985hk.tif