Notifier Zareba Sensepoint Pro - Manual (Page 3)

Installation Details
Installation Details
Sensepoint Pro is designed for use in potentially
explosive atmospheres. As such, installation
should follow national guidelines using suitably
approved steel wire armored cable and glands
(M20 or 3/4”NPT) or conduit (3/4”NPT).
Use 0.5mm 2 (20AWG) to 2.5mm 2 (14AWG)
cross sectional area cable, as needed to ensure
minimum operating voltage at the detector,
depending upon installed cable length.
Various accessories are available for different
applications.
Poie Mount Wall Mount
Duct Mount Collecting Cone
Dimensions
Electrical Connections
20.0-80.0mm 20.0-80.0mm / /
0.8"-3.2" 0.8"-3.2"
" "
2 2
3 3
/ /
0 0
0 0
8 8