Kenwood RA-5000 - Manual (Page 28)

28
RV-7000/RV-6000/RA-5000
Set
u
p
The speaker settings can be completed by simply selecting the
room type and listening position. The audio will be corrected
automatically according to the characteristics of the speaker
system in use.
If more detailed speaker settings are required, use the procedure
in <Speaker setup (Detailed Setup)>
ª.
($6<6(783
08/7,&21752/ ∞/5
1
Press [EASY SETUP] to enter the Easy Setup mode.
2
Set the listening room size.
Use [MULTI CONTROL ∞/5] to select your room type.
[EASY SETUP]
3
Select the listening position.
Use [MULTI CONTROL ∞/5] to select your listening
position.
[EASY SETUP]
The unit exits the Easy Setup mode, and the speakers are
set up as shown below.
Setting of RV-7000
Subwoofer \ ON
Front speaker \ Avarage size
Center speaker \ Avarage size
Surround speaker \ Avarage size
Surround Back speaker \ OFF
Front Height speaker \ OFF
Subwoofer Re-mix \ ON
Setting of RV-6000
Subwoofer \ ON
Front speaker \ Avarage size
Center speaker \ Avarage size
Surround speaker \ Avarage size
Surround Back speaker \ OFF
Subwoofer Re-mix \ ON
For details on the setting contents, see <Speaker setup
(Detailed Setup)>
ª.
• Easy setup with may not be appropriate with certain
speaker systems or listening environment. In this case, go
through <Speaker setup (Detailed Setup)>.
• Easy setup can set only the 5.1 channel system.
If the setup for 7.1-channel or 6.1-channel system is
required, go through <Speaker setup (Detailed Setup)>.
• Subwoofer Re-mix:
Mixes the bass tone of other channels to the subwoofer
channel.
Reference for listening room size
3m (9'10-3/8")
4m (13'1-7/8")
5m (16'5-3/8")
4m (13'1-7/8")
6m (19'8-7/8")
7m (23'3/8")
SMALL
12m 2 24m 2 35m 2
MEDIUM LARGE
Reference for listening position
FRONT
CENTER
REAR
Speaker setup (Easy Setup) (RV-7000/RV-6000 only)
B60-5827-08_00_En.indd 28 10.8.3 11:07:58 AM