Kenwood RA-5000 - Manual (Page 37)

English
37
P
la
y
in
g m
u
si
c o
r mo
vi
e
92/80( 
,13876(/(&725 ∞/5
92/80(&21752/
1
Select a source.
Use the Input source keys on the remote control unit to
select a source.
Or use [INPUT SELECTOR] key on the main unit.
Example: Display when HDMI 1 input source is selected
2
Start playback from the selected source.
3
Use [VOLUME
%/fi] to adjust the volume.
4
Enjoy various surround effects.
You can enjoy a variety of listen modes. (See <Surround
play using the listen mode>
q.)
The surround effects can be fine tuned according to the
selected input source. (See <Adjustments according to the
playing source>
o.)
Input source keys
Playback
ARC (Audio Return Channel) ARC (Audio Return Channel)
This function allows the audio signal from an Audio Return
Channel (ARC) compatible TV to be input into the HDMI
MONITOR terminal of this unit.
To use this function, set "LINK SET" in the HDMI setup to "ON".
Connection of ARC-compatible TV monitor
HDMI cable
HDMI cable
Connection of ARC-incompatible TV monitor
When your TV monitor is not compatible with Audio Return
Channel (ARC), it is required to connect the optical cable.
HDMI cable Optical cable
HDMI cable
B60-5827-08_00_En.indd 37 10.8.3 11:08:13 AM