Kenwood RA-5000 - Manual (Page 49)

English
49
Sound ad
ju
st
men
t
The audio can be adjusted as desired according to the source
being played.
6281'
08/7,&21752/

08/7,&21752/ ∞/5
1
Press [SOUND] to enter the surround adjustment
mode.
Each press switches the mode as follows.
Note that some items are not displayed depending on
speaker settings and listen mode.
Settings of RV-7000
Display Setting item Range
"LH" Left Height speaker level -10 – +10dB
*1
"C" Center speaker level -10 – +10dB
"RH" Right Height speaker level -10 – +10dB
"SR" Surround Right speaker level -10 – +10dB
"SBR" Surround Back Right speaker level -10 – +10dB
"SB" Surround Back speaker level -10 – +10dB
"SBL" Surround Back Left speaker level -10 – +10dB
"SL" Surround Left speaker level -10 – +10dB
"SW" Subwoofer level -10 – +10dB
"INPUT" Input level -6, -3, 0 *2
"MIDNIGHT" Midnight mode
"AUTO", "ON",
"OFF"
*3
"PANORAMA" Panorama mode "ON", "OFF"
*4 "DIMENSION" Dimension
"CENTER WIDTH" Center Width
*6
"CENTER IMAGE" Center Image 0.0 – 1.0 *5
Input source
name
Exit the adjustment mode.
Settings of RV-6000
Display Setting item Range
"C" Center speaker level -10 – +10dB
*1
"SR" Surround Right speaker level -10 – +10dB
"SB" Surround Back speaker level -10 – +10dB
"SL" Surround Left speaker level -10 – +10dB
"SW" Subwoofer level -10 – +10dB
"INPUT" Input level -6, -3, 0 *2
"MIDNIGHT" Midnight mode "ON", "OFF" *3
"PANORAMA" Panorama mode "ON", "OFF"
*4 "DIMENSION" Dimension
"CENTER WIDTH" Center Width
*6
"CENTER IMAGE" Center Image 0.0 – 1.0 *5
Input source
name
Exit the adjustment mode.
Settings of RA-5000
Display Setting item Range
"SW" Subwoofer level -10 – +10dB
"INPUT" Input level -6, -3, 0 *2
"MIDNIGHT" Midnight mode "ON", "OFF" *3
Input source
name
Exit the adjustment mode.
* 1 The adjustment is only temporary for the current input
selection. The value will return automatically to the original
setup value when the power is turned on/off or when the
input selection is changed.
* 2 Analog source only
* 3 Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD and
DTS signal only.
"AUTO" can be selected only in the Dolby TrueHD signal.
* 4 Pro Logic II Music mode and Pro Logic IIx Music mode only
* 5 Neo:6 Music mode only
* 6 "CENTER WIDTH" and "CENTER IMAGE" can be selected only
when the center speaker is installed.
2
Use [MULTI CONTROL ∞/5] to adjust the desired
item.
For detailed adjustment method, see the explanation of
each item.
To exit the sound adjustment mode
Press [SOUND].
Adjustments according to the playing source
B60-5827-08_00_En.indd 49 10.8.3 11:08:33 AM