Kenwood RA-5000 - Manual (Page 42)

42
RV-7000/RV-6000/RA-5000
S
u
rrou
n
d ef
fe
c
ts
Virtual Surround
(RV-7000/RV-6000)
Dolby Virtual Speaker
(RA-5000)
These modes allow you to enjoy surround sound even when you
connect only the front speakers.
9,578$/6855281' 5959 
'2/%<9,578$/63($.(5 5$
9,578$/
1
Press [VIRTUAL] (remote control unit) or [VIRTUAL
SURROUND]/[DOLBY VIRTUAL SPEAKER] (main
unit).
Each press switches the mode as follows:
RV-7000/RV-6000 only
Display Setting
"VS ON" Sets Virtual Surround mode to “ON”..
"VS OFF" Sets Virtual Surround mode to “OFF”..
RA-5000 only
Display Setting
"DOLBY VS REF" Provides the virtual surround effect. This is the standard setting.
"DOLBY VS WIDE"
Provides the virtual surround effect with a wider expansion and
spatial feeling.
"DOLBY VS OFF" Sets Dolby Virtual Speaker mode to off
Checking the current input
signal
The type and number of channels of the audio signal input can
be checked.
',63/$<
1
Press [DISPLAY].
The input signal names and the numbers of their channels
are displayed in scrollable format.
Example: Display with DTS 5.1-channel input
• After displaying the type of listen mode and its number of
input channels, the display will switch back to the input
source name.
• This function is not available when in Tuner source.
B60-5827-08_00_En.indd 42 10.8.3 11:08:21 AM