Kenwood K-511USB-B - Manual (Page 27)

CD DUSB
CD DSD1
CD DSD2
Numeric
P.MODE
STOP F
ENTER
CD E
G/H
MULTI CONTROL
52 K-511USB/RD-K511USB 53 English
One-Touch Edit recording
Single press of a button starts automatic recording
from a CD into SD1, SD2 or USB.
Preparation before recording
When the CD title information is necessary, acquire it in
advance as described in "Acquiring CD title information".
(page 24)
Insert a recordable SD card or USB device in the main unit.
Load the CD to be recorded.
Recording all tracks in CD
All tracks in the CD will be recorded.
1
Select the CD source and enter stop
mode.
2
Start recording.
Recording in SD
Press [CD DSD1]/[CDDSD2].
Recording in USB
Press [CD DUSB].
Recording from CD into SD1/SD2/USB starts.
It stops when all of the CD tracks have been
recorded.
•
•
•
Recording CD in SD/USB
Recording a single track in CD
Only one track in a CD can be selected and recorded.
1
Select the CD source.
2
Play the track to be recorded.
Press [CD E].
Select the track in advance.
3
Start recording.
Recording in SD
Press [CD DSD1]/[CDDSD2].
Recording in USB
Press [CD DUSB].
Recording starts with the beginning of the track
being played, and pauses after completion.
Recording desired tracks in
desired order
CD tracks can be recorded in the desired order
using the program mode.
1
Select the CD source and enter stop
mode.
2
Enter the program mode and select
the tracks to be recorded.
Program tracks following steps 1 to 4 in "Program
mode playback". (page 30).
•
3
Start recording.
Recording in SD
Press [CD DSD1]/[CDDSD2].
Recording in USB
Press [CD DUSB].
Recording of program playback starts.
To stop recording in the middle:
Press [STOP F].
The programmed tracks are recorded until the
position where playback is stopped. It is not
possible to pause recording in the middle.
When recording completes:
"DATA WRITING" blinks
and recording end
completely.
To change recording-related settings, see "Making the
recording setup using the Setup menu". (page 84)
A message is displayed if recording is not possible. For
details, see "Displayed Message List". (page 106)
If the AMG database information or CD-TEXT information
is available, the information is added to the recorded
folder/fi les.
Do not switch the system OFF or apply shock or vibration
to it while "DATA WRITING" is displayed.
If the power to the system is shut off before "DATA
WRITING" disappears, the recorded data will be lost.
Press [STOP F] twice to record all of the fi les in an audio
fi le disc.
PCM recording at the 4x speed is not possible with a USB
device. Set the 1x-speed recording when using the PCM
recording mode. (page 87)
■
■
•
•
•
•
•
•
•
Rec
o
rd