Kenwood K-511USB-B - Manual (Page 31)

Numeric
STOP F
USB E
SD1 E
SD2 E
USB MOVE
SD1 MOVE
SD2 MOVE
G/H
ENTER
TOOL
RETURN
MULTI CONTROL
60 K-511USB/RD-K511USB 61 English
Moving a folder or audio fi le
A folder or audio fi le can be moved between SD1,
SD2 and USB. Even an audio fi le being played can
be moved.
USB
device
: Folder
: File
To move the fi le being played, start the procedure from
step 4.
The moved fi le should be a WMA, MP3, AAC or WAV fi le.
1
Insert the media.
Insert the SD card(s) and/or USB device for use as
the move source and move destination.
Move source: Medium from which the folder or fi le is
moved.
Move destination: Medium to which the folder or fi le
is moved.
2
Select the move source audio
source.
Press [SD1 E]/[SD2E]/
[USB E].
3
Select the folder or fi le to be moved.
Use [MULTI CONTROL] or the
numeric button(s).
Use [MULTI CONTROL].
When there is a fi le being played, this fi le will be
moved.
•
•
•
•
•
4
Select the move destination.
Press [SD1 MOVE]/[SD2 MOVE]/[USB
MOVE].
continued from "Editing using the
Tool menu" (page 70)
Use [MULTI CONTROL A/B]
to select, then press [ENTER].
When moving from SD1
to SD2
Perform the following steps in the same way as above.
5
Select the move destination folder.
Select where the fi le or folder is moved by newly
creating a folder or to an existing folder.
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
When a new folder is
created
When an existing folder
is selected
When move is canceled
6
Enter the selection.
Once the move operation is started, it cannot be
canceled in the middle.
Select "CANCEL" to cancel the move operation before starting it.
When moving into a newly created folder
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
A new folder is created in
the move destination KWD
folder and movement of the
fi le into the new folder starts.
•
When moving into an existing folder
1Select the move destination folder.
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
When folder "A_A001"
is selected as the move
destination folder
2Start the move operation.
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
If a fi le with the same name as the moved fi le is
present in the move destination folder, it is possible
to select whether the fi le is moved by overwriting the
existing fi le or the move operation is canceled.
The display becomes as follows when the move
operation completes.
At the completion of
move from SD1 to SD2
Folder and fi le names of move destination
The folder or fi le name may sometimes be
changed automatically as a result of move.
KWD
: Folder
T002.WMA
: File
T001.WMA
Selection of an
existing folder
Creation of a
new folder
A_A002
A_A001
T010.WMA
T010.WMA
T001.WMA
KWD
T002.WMA
T001.WMA
A_A001
A_A010
•
■
■
Edit