Kenwood K-511USB-B - Manual (Page 46)

90 K-511USB/RD-K511USB 91 English
Recording the CD-TEXT
information (TEXT COPY)
When recording CD into SD/USB, the CD-TEXT
information can be copied in the recording
destination folder or fi le name according to the
following setting.
1
Select "TEXT COPY".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select whether or not the CD-TEXT
data is recorded.
Press [MULTI CONTROL A/B].
Each press switches the selection.
OFF
CD-TEXT data is not
recorded.
ON
CD-TEXT data is
recorded.
3
Enter the selection.
Press [ENTER].
When the CD title information is acquired from the AMG
database, the AMG database information is recorded in
priority over the CD-TEXT data.
•
Dividing fi les automatically
(DIVIDE TIME)
During recording of radio broadcasting in SD/
USB, the fi le can be divided automatically at the
intervals set below.
1
Select "DIVIDE TIME".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select the fi le division interval.
Press [MULTI CONTROL A/B].
Each press switches the selection.
30 min.
File is divided every 30
minutes.
15 min.
File is divided every 15
minutes.
File is divided automatically
after 3 seconds of no-
sound condition.
OFF
3
Enter the selection.
Press [ENTER].
Even when the setting for dividing the fi le every time a
no-sound condition has lasted for 3 seconds or more, the
fi le division sometimes does not occur due to noise from
the audio source, etc.
•
Relay recording between SD1 and
SD2 (RELAY REC)
Sets whether or not recording is relayed from SD1
to SD2 when recording iPod/D.AUDIO/TUNER/AUX
into SD.
1
Select "RELAY REC".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select whether or not relay
recording is used.
Press [MULTI CONTROL A/B].
Each press switches the selection.
OFF
Relay recording is
canceled.
ON
Relay recording is set.
"RELAY REC" lights up.
3
Enter the selection.
Press [ENTER].
If the SD card containing a copy of the AMG database is
inserted in the SD2 slot, replace the card with another
SD card.
The audio is interrupted at the point the recording
destination is switched from SD1 to SD2.
•
•
Rec
o
rding S
etup
Making the recording setup using the Setup menu