Kenwood K-511USB-B - Manual (Page 8)

14 K-511USB/RD-K511USB 15 English
REC OUT
Connect a kenwood digital audio player with
direct encoding function to the [REC OUT]
terminal on the rear of the main unit.
The [REC OUT] terminal output the analog audio
signals. •
To REC IN
AUX IN
Connect the audio output of the VCR, etc. to the
[AUX IN] terminals on the rear of the main unit.
AUDIO OUT
VCR, etc.
SUB WOOFER PRE OUT
Connect a subwoofer (SW-40HT (separately
available), etc.) to the [SUB WOOFER PRE OUT]
terminal on the rear of the main unit.
Subwoofer
PHONES
Connect headphones with a stereo miniplug to
the [PHONES] jack on the front of the main unit.
Connecting associated products (commercially available)
Before connecting associated system products, be sure to read their instruction manuals.
Connect every connection cord fi rmly. Incomplete insertion may cause loss of audio output or generation of noise.
•
•
USB
Connect a USB fl ash memory or a digital audio
player with USB mass storage class compatibility
to the [ USB] terminal on the front of the main
unit.
With certain models, it takes a certain period
before the connection is recognized.
Certain models display the USB connection mode
selection menu. In this case, select the "Storage"
mode.
•
•
iPod/D.AUDIO IN
Connect a digital audio player or an iPod to the
[iPod/D.AUDIO IN] terminal on the rear of the
main unit.
When a kenwood digital audio player with digital
audio link compatibility is connected using the
PNC-150 dedicated cable (separately available),
the player can be controlled from this system or
its remote control unit. The iPod can be controlled
when it is connected using the PAD-iP7 dedicated
adapter (separately available). (page 40)
A digital audio player other than above can
be connected using a stereo miniplug cable
(commercially available).
When not using the digital audio player or the iPod,
unplug the miniplug cable from the main unit.
•
•
•
Y Cb Cr
AUDIO/ VIDEO DC IN
COMPONENT VIDEO
D.AUDIO
kenwood
digital audio player
iPod
PNC-150 (separately
available)
PAD-iP7 (separately
available)
Stereo miniplug cord (separately
available)
Digital audio player,
etc.
Connections
Read bef
or
e use
Caution for connection Set the main unit in the standby mode before connecting any associated product to
it and do not set the power button to ON until all connections are completed. Before
unplugging a connected cord or cable, be sure to set the power button to OFF and
unplug the power cord from the power outlet in advance.