Kenwood NX-300SE - Manual (Page 24)


SELECTING A ZONE AND CHANNEL/GROUP ID
Select the desired zone using the key programmed as Zone
Select or Zone Up/Down (DFK]RQHFRQWDLQVDJURXSRI
channels.
6HOHFWWKHGHVLUHGFKDQQHOJURXS,'XVLQJWKH6HOHFWRUNQRE
GHIDXOW (DFKFKDQQHOJURXS,'LVSURJUDPPHGZLWKVHWWLQJV
for transmitting and receiving.
‡ <RXFDQWRJJOHWKHGLVSOD\EHWZHHQWKH]RQHDQGFKDQQHOJURXS
ID names and number by pressing the key programmed as Display
)RUPDWRUE\DFFHVVLQJWKH0HQX 1;1;2QO\ ^SDJH`
Note: If the default settings for   1;1;2QO\ 
and the Selector knob have been changed, use the appropriate
NH\VWRVHOHFWWKH]RQHDQGFKDQQHOJURXS,'
TRANSMITTING
1  6HOHFWWKHGHVLUHG]RQHDQGFKDQQHOJURXS,'
2 Press the key programmed as Monitor or Squelch Off to
FKHFNZKHWKHURUQRWWKHFKDQQHOLVIUHH
‡ ,IWKHFKDQQHOLVEXV\ZDLWXQWLOLWEHFRPHVIUHH
3 Press the PTT VZLWFKDQGVSHDNLQWRWKHPLFURSKRQH
Release the PTT VZLWFKWRUHFHLYH
‡ )RUEHVWVRXQGTXDOLW\KROGWKHWUDQVFHLYHUDSSUR[LPDWHO\
LQFKHV aFP IURP\RXUPRXWK
Q Making Group Calls (Digital) (NX-200/ NX-300 Only)

,IDNH\KDVEHHQSURJUDPPHGZLWKGroup or Group +
Status, you can select a group ID from the list to make a
call to those parties on a Conventional channel.
To select a group ID:
1 Press the key programmed as Group or Group + Status.
2 Press  WRVHOHFWDJURXS,'QDPHIURPWKHOLVW
3 Press and hold the PTT VZLWFKWRPDNHWKHFDOO
‡ 6SHDNLQWRWKHWUDQVFHLYHUDV\RXZRXOGGXULQJDQRUPDO
transmission.