Kenwood NX-300SE - Manual (Page 30)

19
SCAN REVERT
7KH6FDQ5HYHUWFKDQQHOLVWKHFKDQQHOVHOHFWHGZKHQ\RX
press the PTT
VZLWFKWRWUDQVPLWGXULQJVFDQ<RXUGHDOHUFDQ
SURJUDPRQHRIWKHIROORZLQJW\SHVRI6FDQ5HYHUWFKDQQHOV
•
Selected: The last channel selected before scan.
• Selected + Talkback: Same as “Selected”, plus you can
UHVSRQGWRFDOOVRQWKHFKDQQHODWZKLFKVFDQLVSDXVHG
• Priority 1/ Priority 2: 7KH3ULRULW\FKDQQHO HLWKHU3ULRULW\
RU3ULRULW\ 
• Priority 1 + Talkback/ Priority2 + Talkback: Same as
´3ULRULW\3ULRULW\µSOXV\RXFDQUHVSRQGWRFDOOVRQWKH
FKDQQHODWZKLFKVFDQLVSDXVHG
• Last Called + Selected: 7KHODVWFKDQQHORQZKLFK\RX
receive a call.
SCAN DELETE/ADD
<RXFDQDGGDQGUHPRYH]RQHVDQGRUFKDQQHOVJURXS,'VWR
and from your scan list.
1  6HOHFW\RXUGHVLUHG]RQHDQGRUFKDQQHOJURXS,'
2 Press the key programmed as Zone Delete/Add  WR
DGGUHPRYH]RQHV or Scan Delete/Add WRDGGUHPRYH
FKDQQHOVJURXS,'V  1;1;2QO\ 
• You can also press and hold the key programmed as Scan
Delete/Add
WRDGGUHPRYH]RQHV
PRIORITY-CHANNEL SELECT (NX-200/ NX-300 ONLY)
If the Priority channel has been set as Operator Selectable by
your dealer, you can reprogram the Priority channels.
1  6HOHFW\RXUGHVLUHG]RQHDQGFKDQQHOJURXS,'
2 Press the key programmed as Priority-channel Select.
3 Press  WRVHOHFW´1250$/µ´35,25,7<µ   
´35,25,7<µ   RU´35,25,7< µ   
4 Press WRVDYHWKHVHWWLQJDQGH[LW