Kenwood NX-300SE - Manual (Page 35)


STATUS MESSAGE
<RXFDQVHQGDQGUHFHLYH6WDWXVPHVVDJHVZKLFKPD\EH
decided in your talk group. Messages can contain up to 16
alphanumeric characters.
$PD[LPXPRIUHFHLYHGPHVVDJHVFDQEHVWRUHGLQWKH
stack memory of your transceiver.
Q Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Status to enter Status
PRGH SURFHHGWRVWHS RUSelcall + Status to enter
6HOFDOOPRGH SURFHHGWRVWHS 
3 Press  WRVHOHFWWKHVWDWLRQ\RXZDQWWRFDOO
• You can enter a station ID by using the DTMF keypad, or
by using
 .
4 Press to enter Status mode.
5 Press  WRVHOHFWWKHVWDWXV\RXZDQWWRWUDQVPLW
• You can enter a status ID by using the DTMF keypad, or by
using
  UHIHUWRVWHSDERYH 
6 Press the key programmed as Call 1 to Call 6 to initiate
the call.
Q Receiving

$FDOOLQJ,'RUWH[WPHVVDJHZLOODSSHDUZKHQD6WDWXVFDOO
is received. Press any key to return to normal operation.
Q Reviewing Messages in the Stack Memory
1 Press the key programmed as Stack to enter Stack mode.
• The last received message is displayed.
2 Press  to select the desired message.
• Press and hold for 1 second or press to cycle the
GLVSOD\LQIRUPDWLRQDVIROORZV
6HOFDOO1DPH!6WDWXV1DPH!&+*,'!7LPH6WDPS