Kenwood NX-300SE - Manual (Page 31)


FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
)OHHW6\QFLVDQ$OSKDQXPHULFZD\3DJLQJ)XQFWLRQDQGLVD
SURWRFRORZQHGE\Kenwood Corporation.
Note:
X This function is available only in analog operation.
X Ask your dealer for further information regarding the
NX-200S/ NX-300S.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a station or group of stations.
Q Transmitting (NX-200/ NX-300 Only)
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
3 Press  WRVHOHFWWKHVWDWLRQ\RXZDQWWRFDOO
• On keypad models, if Manual Dialing is enabled, you can
directly enter the station ID.
4 Press the PTT VZLWFKDQGEHJLQ\RXUFRQYHUVDWLRQ
Q Receiving

$QDOHUWWRQHZLOOVRXQGDQGWKHWUDQVFHLYHUZLOOHQWHU
6HOFDOOPRGH7KHFDOOLQJVWDWLRQҋV,'ZLOODSSHDUZKHQ
D6HOFDOOLVUHFHLYHG 1;1;2QO\ <RXFDQ
respond to the call by pressing the PTT
VZLWFKDQG
speaking into the microphone.
Q Identification Codes

$Q,'FRGHLVDFRPELQDWLRQRIDGLJLW)OHHWQXPEHUDQGD
GLJLW,'QXPEHU(DFKWUDQVFHLYHUKDVLWVRZQ,'
‡ (QWHUD)OHHWQXPEHU a WRPDNHDJURXSFDOO
‡ (QWHUDQ,'QXPEHU a WRPDNHDQLQGLYLGXDOFDOOLQ
\RXUÁHHW