Kenwood NX-300SE - Manual (Page 39)


If a call containing a different RAN is made on the same
FKDQQHO\RXDUHXVLQJ\RXZLOOQRWKHDUWKHFDOO7KLV
DOORZV\RXWRLJQRUH QRWKHDU FDOOVIURPRWKHUSDUWLHVZKR
are using the same channel.
Q Optional Signaling
Your dealer may also program several types of optional
signaling for your transceiver channels.
5-tone Signaling (NX-200/ NX-300 Only): Refer to
“
6(/&$// 6(/(&7,9(&$//,1* µRQSDJH.
DTMF Signaling : DTMF Signaling opens the squelch only
ZKHQWKHWUDQVFHLYHUUHFHLYHVDFDOOFRQWDLQLQJDPDWFKLQJ
DTMF code.
FleetSync Signaling : Refer to “ 6(/&$// 6(/(&7,9(
&$//,1* µRQSDJH
NXDN ID Signaling: NXDN ID is an optional signaling
system available only for digital communications.
VOICE OPERATED TRANSMISSION (VOX)
VOX can be activated or deactivated by your dealer. VOX
RSHUDWLRQDOORZV\RXWRWUDQVPLWKDQGVIUHH
Note: 7RRSHUDWH92;\RXPXVWXVHDQRSWLRQDO.+6.+6
.+6%+RU.+62+KHDGVHW
Q VOX Gain Level (NX-200/ NX-300 Only)
1 Connect the headset to the transceiver.
2 Press the key programmed as VOX.
‡ 7KHFXUUHQW92;*DLQOHYHODSSHDUVRQWKHGLVSOD\
3 Press  WRLQFUHDVHRUGHFUHDVHWKH92;*DLQ
level.
‡ 7KH92;*DLQFDQEHDGMXVWHGIURPOHYHOVWR