Kenwood TK-2180E - Manual (Page 22)

15
• Transceiver Password
• Voice Memo 2
• VOX
• Zone Delete/Add
• Zone Down
• Zone Down (Continuous)
• Zone Up
• Zone Up (Continuous)
1 “Auto Reply Message” can be used only for FleetSync.
2 “Auto Reply Message”, “Playback”, and “Voice Memo” can be
programmed only when the optional VGS-1 board has been
installed.
3 “ Digit 1x Down”, “ Digit 10x Down”, “ Digit 1x Up”, “ Digit 10x Up”,
and “Receive Entry” can be programmed only for 5-tone calls.
4 “Emergency” can be programmed only on the Auxiliary (orange) key
and the PF1 key of the optional KMC-25 speaker/ microphone.
5 “Speaker Attenuation” can be programmed only on the PF1 and
PF2 keys of the optional KMC-25 speaker/ microphone.